| Model |
TC-2030 |
| Measuring Method of Roll Diameter |
Combined Material Thickness Measurement，
Ultrasonic Induction (Option) / Contact Rod (Option) |
| Power Supply |
AC187~253V 50 / 60Hz |
| Rated Output |
DC24V 3A，DC0~5V (Simulated Signal O/P) |
| Input Signal |
• DC12V Proximity Switch (Open Mode)
• 0~+10V Roll Diameter I/P |
| Roll Diameter Setting Range |
10-2000mm |
| Materials Setting Range |
10-9000μm |
| Display Type |
Seven-Segment type of LED (Control Output Voltage of Roll Diameter ) |
| Control Way |
• Attenuating Tension
• Acceleration Speed Inertia Compensation (Jog Contact)
• Decrease Speed Inertia Compensation (Jog Contact) |
| Working Environment |
• Ambient Temp.：0~-55 ℃
• Ambient Humidity：35~85%
• Vibration：10~55Hz 0.5mm (Max. 0.5G)
• Corroded Gas，Dust and Rainwater、Flammable Gas、Conduction Dust and Dusty Environment is prohibited。 |
| Weight |
~ 3.5kg |
| Installation |
• Wall Mounting
• Flat Surface Mounting
• Ground Mounting
(Embedded Dimension 230W x 150H, mm) |
| Option |
If Ultrasonic Induction or Contact Rod is selected as Input, then don’t need PC Module |
