TC-2030 is a cost-effective solution for non-contact, open-loop web tension control. It allows flexible configurations of control from a simple control for winding/unwinding application to a complex control using a built-in computed program with Ultrasonic Sensor or Contact Sensor for Semi-Automatic Web Tension Control.
It has 8 sets of internal memory function, which can memorize 8 kinds of materials for production.
The rotary function switch can set parameter easily.

It can be set tension value in advance to correct the unstable state during start owing to static friction.

It has a large screen of LED display, which can be displayed output kg.% and radius value by “Display Circulating” Key.

It has Auto and Manual Control function.

It can select the function of rewinding / unwinding.

The thickness of materials can be set from 10um to 9000um; the radius of empty shaft can be set from 10mm to 2000mm.

It can be set Taping Tension Function, which can change tension for the variation of radius of roll.

It can be connected an external ultrasonic sensor to detect the radius for assisting the tension control.

It contains a set of output DC 24V/5A, which can directly control magnetic powder clutch.

The output signal DC 0-10V of terminal could directly control Torque Controller, Current-Control Mode Vector Inverter, DC Motor Controller, Servo Motor Controller.

Multi-function terminal can control the output of stop for running, and remotely control the reset of radius setting, acceleration gain and switching of forward and reverse revolution.

Model
TC-2030
Measuring Method of Roll Diameter Combined Material Thickness Measurement, Ultrasonic Induction (Option) / Contact Rod (Option)
Power Supply AC187~253V 50 / 60Hz
Rated Output DC24V 3A,DC0~5V (Simulated Signal O/P)
Input Signal ‧ DC12V Proximity Switch (Open Mode)
‧ 0~+10V Roll Diameter I/P
Roll Diameter Setting Range 10-2000mm
Materials Setting Range 10-9000μm
Display Type Seven-Segment type of LED (Control Output Voltage of Roll Diameter )
Control Way ‧ Attenuating Tension
‧ Acceleration Speed Inertia Compensation (Jog Contact)
‧ Decrease Speed Inertia Compensation (Jog Contact)
Working Environment ‧ Ambient Temp.:0~-55 ℃
‧ Ambient Humidity:35~85%
‧ Vibration:10~55Hz 0.5mm (Max. 0.5G)
‧ Corroded Gas,Dust and Rainwater、Flammable Gas、Conduction Dust and Dusty Environment is prohibited。
Weight ~ 3.5kg
Installation ‧ Wall Mounting
‧ Flat Surface Mounting
‧ Ground Mounting
(Embedded Dimension 230W x 150H, mm)
Option If Ultrasonic Induction or Contact Rod is selected as Input, then don’t need PC Module
 
EUNTAY ELECTRIC CO. LTD. © Copyright Reserved
1F, NO. 492-17, Sec.1, Wanshou Rd., Guishan Township, Taoyuan County , 33350. Taiwan
TEL:886-2-82090817 FAX:886-2-82090327
E-mail:inter-sales@euntay.tw