 |
 |
|
|
 |
|
 |
| Edge Position Controller EPD-3008 could accept ultrasonic or IR detector’s signal to drive electric cylinder for achieving the purpose of edge position control. |
|
 |
• |
It combined the operation panel and controller in a whole one and can be:
a. Installed directly on the panel for operation.
b. Standalone operation at outside. |
• |
It could receive a variety of detection signals. |
• |
It could work with a variety drive devices, such as EPM series Electric Cylinder. |
| • |
It is built in DC motor’s feedback loop circuit, can select a drive device with feedback function based on requirement and could enhance the accuracy and response of edge position control. |
| • |
It is built in output signal loop circuit and could connect to external drive device of high capacity to expand the driving capability of edge position control. |
| • |
It is built in communication function of RS-485 and could connect to IPC or PLC. |
|
|
 |
 |
|
| Edge Position Controller EPD-3008 |
 |
 |
| System |
|
| Power |
AC 220V±10%, 50 / 60Hz, 200mA |
| Detector’s power |
DC±12V, 200mA max. |
| Operation mode |
Control panel of EPD-3008 |
| Ambient temperature |
0°C ~45°C |
| Ambient humidity |
35 - 85% RH (No condensation) |
| Environment requirement |
Without corroded gas, flammable gas and conduction dust |
| Weight |
2.6Kg |
|
|
|
| Mechanic data |
|
| Mounting |
Panel-mount, Wall-mount, Table-mount |
| Housing |
Iron Box with powder-coating |
| Dimension |
Refer to “Dimension Diagram” |
|
|
|
| Electric data |
|
| Input signal of detection |
DC±8V, Input impedance 20K |
| Detector communication signal |
Work with the communication type detector
(Fast response transmission, Euntay Electric product specification) |
| Output analog signal of edge-position |
DC 0 ~ ±8V, 5mA max. |
| Output to Motor |
DC 0 ~ ±24V, 3A max. |
| Communication |
RS-485 RTU communication mode |
|
|
 |
|
 |
 |
|
| Edge Position Controller EPD-3008 |
|
|
|
|
|
 |
|
| Edge Position Controller EPD-3008 |
|
|
|
 |
|
 |
|
|
|
|
|
| Edge Position Controller EPD-3008 is applied to the edge position control of “Plastic Inflation Machine”. |
|
|
 |
 |
 |
 |
| High precision EPC System |
 |
| Detector |
|
|
|
|
|
|
|
| Controller |
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
